Acoustic / geophysical instrumentation:
-Furuno CH 250 Sonar, 60 Khz transducer
-Echosounder Koden CVS 8842
-ADCP(Acoustic doppler current profiler) RDI 300
Instrument that allows to characterize the marine currents from the different components of the speed in the different layers of water.
More information
-ADCP FlowQuest 150
Instrument that allows to characterize the marine currents from the different components of the speed in the different layers of water
Equipment for continuous analysis
-SBE21 Thermosalinograph
Instrument designed to collect data on temperature, salinity and water conductivity, are usually installed connected to a continuous circuit of surface marine water
-10AU Turner Designs Fluorometer
Used to measure the light emitted by certain water compounds when excited by a given wavelength, serves to estimate chlorophyll in live; continuous sampling next to the thermosalinograph.
Instrumentation for sampling the water column, the atmosphere and the seabed
-GravityCorer
Oceanographic instrument designed to collect sediment samples from the seabed. The gravity core is dropped vertically in the water and it falls by gravity to penetrate the ground for later recovery.
-Aandearaa 3010 Meteorological station
Meteorological station that includes sensors of atmospheric pressure, temperature, relative humidity, global radiation, speed, wind direction and ultraviolet radiation (UV)
-Meteodata - 3016 Meteorological station
Meteorological station that includes sensors of atmospheric pressure, temperature, relative humidity, global radiation, speed, wind direction and ultraviolet radiation (UV)
More information
-Sea Bird SBE25 CTD
Oceanographic instrument used to measure the parameters of conductivity, temperature and pressure in the water column, you can also add other sensors to measure other parameters such as turbidity, oxygen, chlorophyll among others.
The CTD SBE 25 has the following sensors:
- SBE3F Temperature sensor
- SBE4C Conductivity sensor
- SBE29 Pressure sensor
- 5T Pump
Auxiliary sensors:
- WetLabs FLRTD Fluorometer
- SeaBird SBE43 oxygen sensor
- QSP-200pd PAR Sensor Biospherical
-CTD SBE911 plus, CTD SBE9 plus + cover unit Sea-Bird SBE11 plus V2.
Oceanographic instrument used to measure the parameters of conductivity, temperature and pressure in the water column, you can also add other sensors to measure other parameters such as turbidity, oxygen, chlorophyll among others. In addition, a system called carousel can be installed where a series of Niskin bottles are installed. Sampling bottles are closed at predefined depths, activated manually or by a computer, and water samples can be analyzed later to determine the biological parameters and chemicals.
The CTD SBE911 plus has the following sensors:
- SBE3plus temperature sensor
- 4C Conductivity sensor
- 5T pump
Auxiliary sensors:
- WetLabs FLRTD Fluorometer
- SeaPoint STM Turbidimeter
- SeaBird SBE43 oxygen sensor
- Wetlabs C-Star transmitter
- PSA-916 Benthos Altimeter
-SBE 32 Carousel Water Sampler
System installed in the CTDs where a series of Niskin bottles are installed. Sampling bottles are closed at predefined depths, activated manually or by a computer, and water samples can be analyzed later to determine the biological and chemical parameters
-Niskin Oceanographic Bottles
Bottles that are installed in the CTD carousel for the acquisition of water samples along the water column
